KD-SX8250/KD-SX780
Removing the CD mechanism assembly
Prior to performing the following procedure, remove
the front chassis, the heat sink, bottom cover and the
main amplifier board assembly.
1.
Remove the three screws F attaching the cassette
mechanism assembly from the top cover.
Removing the (LCD & key) control switch
board
Prior to performing the following procedure, remove
the front panel assembly.
1.
Remove the four screws G attaching the rear cover
on the back of the front panel assembly.
2.
Unjoint the nine joints g with the front panel and the
rear cover.
3.
Remove the control switch board on the back of the
front panel.
1-6
(See Fig.9)
(See Fig.10 to 12)
CD mechanism assembly
F
F
Fig. 9
G
G
Fig. 10
Joints g
Front panel
Joints g
Fig. 11
LCD & Key control board
Fig. 12
F
Top cover
G
G
Rear cover
Joints g
Joints g