Denon AVR-2311CI Owner's Manual page 59

ENGLISH
Audio/Video Adjust
n RESTORER
Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce
the amount of data by eliminating signal components that are hard for the human ear to hear. The
RESTORER function generates the signals eliminated upon compression, restoring the sound to
conditions near those of the original sound before compression. It also corrects the sense of volume of
the bass to obtain richer sound with compressed audio signals.
OFF : Do not use RESTORER.
Mode 1 (RESTORER 64) : Optimized mode for compressed sources with very weak highs.
Mode 2 (RESTORER 96) : Apply suitable bass and treble boost for all compressed sources.
Mode 3 (RESTORER HQ) : Optimized mode for compressed sources with normal highs.
• This item can be set with analog signals or when a PCM signal (fs = 44.1/48
kHz) is input.
• This cannot be set when the surround mode is set to "DIRECT" or "PURE
DIRECT".
• This item default setting for "iPod" and "USB/iPod" is "Mode 3". All others are
set to "OFF".
• When set to something other than "OFF",
RESTORER
• Pressing on the remote control unit or the main unit makes this
setting.
OFF Mode 1
(RESTORER 64)
Mode 3
(RESTORER HQ)
n Audio Delay
While viewing video, manually adjust the time to delay audio output.
0ms – 200ms
• This item can be set within the range of 0 to 100 ms when "Auto Lip Sync" is set to "ON" and when
a TV compatible with Auto Lip Sync is connected.
• Store "Audio Delay" for each input source.
• Audio Delay for game mode can be set when "Video Mode" (vpage 49) is set to "Game".
56
Remote control operation
buttons
Setting details
is displayed.
Mode 2
(RESTORER 96)
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)
Picture Adjust
• This item can be set when the input source is
DOCK .
• With input sources other than the ones above, this item can be set when "Video Select" is selected. In
this case, the original input source settings are called out.
• Can be set when the "Video Convert" setting (vpage 49) is "ON".
• "BD", "TV", or "GAME" can be set when "HDMI" (vpage 48) or "Component" (vpage 49) has been
assigned.
Setting items
Contrast –6 – +6 (0)
Adjust picture contrast.
Brightness 0 – +12
Adjust picture brightness.
Chroma Level –6 – +6 (0)
Adjust picture chroma level
(saturation).
Hue –6 – +6 (0)
Adjust color hue.
DNR OFF / Low / Mid / High
Reduce overall picture
noise.
Enhancer 0 – +12
Emphasize picture contours.
• "DNR" and "Enhancer" are each effective with HDMI output.
• The value set at "Picture Adjust" is stored in the memory individually for each input source.
Confirm the setting
Default settings are underlined.
BD DVD TV SAT/CBL DVR GAME
Setting details
Return to previous menu
V.AUX