Denon AVR-2311CI Owner's Manual page 37

ENGLISH
Connect
Front A/B connection
The second set of front speakers can be connected to the SURR. BACK/AMP ASSIGN terminals.
In this case, set "Amp Assign" of "Set up speakers" (vpage 36) to "Front B".
FL(B) FL(A)
For surround playback of a multichannel source, if you connect the center speaker, surround speakers and
subwoofers, 5.1-channel playback is available.
Front speakers can be used separately, depending on the speaker's specifications or playback source such
as front speakers (A) for multichannel playback and front speakers (B) for 2-channel playback (vpage 59
"Front Speaker Setup").
34
SW
FR(A) FR(B)
For speaker impedance and speaker cable connections, see page 4.
2.1-channel/2-channel connection
FL SW
2-channel connection
For 2-channel playback, disconnect the
subwoofers.
n For connecting two subwoofers
Two subwoofers can be connected to this unit.
The same signal is output from each subwoofer terminal.
FR