Troubleshooting; Power-On Indicator Fails To Light After Switching On; The Device Cannot Be Switched Off With The On/Off Switch - Fujitsu Celsius C620 Operation Manual

Troubleshooting

Power-on indicator fails to light after switching on

Cause
The mains voltage supply is faulty.

The device cannot be switched off with the ON/OFF switch.

Cause
System crash
Fujitsu Technology Solutions
Troubleshooting
► Check that the power cable is correctly plugged into
the device and into a grounded power outlet.
► Switch the device on.
Troubleshooting
► Press the ON/OFF switch for at least 5 seconds,
until the device switches off.
The operating system is not shut-down properly in the
process. Error messages are therefore possible the next
time the system is booted.
It may take a few seconds before the system boots. This
is while the system carries out a check.
Troubleshooting and tips
47