Subaru Legacy Owner's Manual page 293

When using the Bluetooth message function
Symptom
Messages cannot be viewed.
displayed.
*: For details, refer to the owner's manual that came with the cellular phone.
Likely cause
Message transfer is not enabled on
the cellular phone.
Automatic transfer function on this
system is set to off.
reception on this system is set to off.
Automatic message transfer function
is not enabled on the cellular phone.
Solution
Enable message transfer on the
cellular phone (approve message
transfer on the phone).
Set automatic transfer function on
this system to on.
reception on this system to on.
Enable automatic transfer function on
the cellular phone.
WHAT TO DO IF
Page
Cellular This
phone system
* -
- 142
- 142
* -
10
291