ZyXEL Communications Armor Z1 NBG6816 User Manual page 36

Figure 25 Expert Mode: Status > System Status: Router Mode
The following table describes the labels shown in the Status screen.
Table 15 Expert Mode: Status > System Status: Router Mode
LABEL
Device Information
Item
Data
Host Name
Model Number
Firmware Version
Sys OP Mode
WAN Information
MAC Address
IP Address
IP Subnet Mask
Default Gateway
IPv6 Address
Chapter 6 Router Mode
DESCRIPTION
This column shows the type of data the ARMOR Z1 is recording.
This column shows the actual data recorded by the ARMOR Z1.
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the model name of your device.
This is the firmware version.
This is the device mode (Section 4.1.2 on page
Mode.
This shows the WAN Ethernet adapter MAC Address of your device.
This shows the WAN port's IP address.
This shows the WAN port's subnet mask.
This shows the WAN port's gateway IP address.
This shows the IPv6 address of the ARMOR Z1 on the WAN.
ARMOR Z1 User's Guide
26) to which the ARMOR Z1 is set - Router
36