ZyXEL Communications Armor Z1 NBG6816 User Manual page 121

Figure 80 Expert > Applications > File Sharing > SAMBA
The following table describes the labels in this screen.
Table 48 Expert > Applications > File Sharing > SAMBA
LABEL DESCRIPTION
SAMBA Setup
Enable SAMBA Select this to enable file sharing through the ARMOR Z1 using Windows Explorer or by
browsing to your work group.
Name Specify the name to identify the ARMOR Z1 in a work group.
Work Group You can add the ARMOR Z1 to an existing or a new workgroup on your network. Enter
the name of the workgroup which your ARMOR Z1 automatically joins. You can set the
ARMOR Z1's workgroup name to be exactly the same as the workgroup name to which
your computer belongs to.
Note: The ARMOR Z1 will not be able to join the workgroup if your local area network has
Description Enter the description of the ARMOR Z1 in a work group.
USB Access
USB1/USB2 Specify the user's access rights to the USB storage device which is connected to the
ARMOR Z1's USB port.
Read & Write - The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the
connected USB device.
User Accounts Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
# This is the index number of the user account.
Chapter 13 Applications
restrictions set up that do not allow devices to join a workgroup. In this case, contact
your network administrator.
ARMOR Z1 User's Guide
121