Table of Contents
Advertisement
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P
Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A or B, according to the input jack on your TV monitor, projector,
or AV amplifier (receiver).
In order to view progressive signal (480p) pictures with a compatible TV, projector, or monitor,
you must use pattern B.
A
(yellow)
INPUT
VIDEO
L
AUDIO
R
TV, projector or AV
amplifier (receiver)
to LINE OUT (VIDEO)
DIGITAL OUT
COAXIAL
R-AUDIO-L
Y
P
B
COMPONENT VIDEO OUT
(green)
(blue)
Component
video cord
(not supplied)
l : Signal flow
A
If you are connecting to a video input jack
Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will
enjoy standard quality images.
Yellow
White (L)
Red (R)
Step 4: Connecting the Audio Cords
Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
This will enable you to listen to sound.
(red)
(white)
(yellow)*
LINE OUT
VIDEO
R-AUDIO-L
DIGITAL OUT
COAXIAL
R-AUDIO-L
Y
P
P
B
R
COMPONENT VIDEO OUT
to DIGITAL OUT (COAXIAL)
DIGITAL OUT
COAXIAL
[Speakers]
Rear (L)
Front (L)
Center
: Signal flow
* The yellow plug is used for video signals (page 15).
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
Audio/video
cord (supplied)
(yellow)
LINE OUT
VIDEO
P
R
to COMPONENT
CD/DVD player
VIDEO OUT
(red)
COMPONENT
VIDEO IN
Y
(green)
P
B
(blue)
P
R
(red)
TV, projector or AV
amplifier (receiver)
Yellow
White (L)
Red (R)
,continued
A
(yellow)*
INPUT
Audio/video
VIDEO
cord (supplied)
(white)
L
AUDIO
(red)
R
TV, projector, or AV
amplifier (receiver)
to LINE OUT L/R (AUDIO)
LINE OUT
VIDEO
CD/DVD player
Coaxial digital cord
(not supplied)
to coaxial
B
[Speakers]
digital input
Rear (R)
Front (R)
AV amplifier (receiver)
with a decoder
Subwoofer
,continued
B
If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
If your TV accepts progressive 480p format signals, use this connection and set
"PROGRESSIVE (COMPONENT OUT)" in "SCREEN SETUP" to "ON" (page 62) to output
progressive signals.
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 61.
Note
Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR, you
may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the
player to this jack.
B
15
16
A
Connecting to audio L/R input
jacks
This connection will use your TV's or stereo
amplifier's (receiver's) two speakers for
sound. Connect using the audio/video cord
(supplied).
Yellow
White (L)
Red (R)
• Surround effect (page 40)
TV: Dynamic Theater, Dynamic, Wide,
Night
Stereo amplifier (receiver): Standard, Night
17
18
1-4
, P
B
Green
Green
Blue
Blue
Red
Red
VCR
CD/DVD player
TV
Connect
directly
B
Connecting to a digital audio
input jack
If your AV amplifier (receiver) has a Dolby*
2
Digital or DTS*
decoder and a digital input
jack, use this connection.
Connect using a digital coaxial cord (not
supplied).
Yellow
Coaxial cord
White (L)
Red (R)
• Surround effect
Dolby Digital (5.1ch), DTS (5.1ch)
*1
Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", and the double-D symbol
are trademarks of Dolby Laboratories.
*2
"DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Notes
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 19).
Otherwise, no sound or a loud noise will come
from your speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the LINE OUT L/R (AUDIO)
jacks, even if you set "DTS" to "ON" in Quick
Setup (page 19).
)
R
1
Advertisement
Table of Contents
