Table of Contents
Advertisement
2-4. OPTICAL PICK-UP
(DEVICE, OPTICAL KHM-313CAA/C2RP)
3 Optical Device
(KHM-313CAA/C2RP)
6 Two Insulator
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge Current or
ElectroStatic Discharge (ESD):
After take-out FMO-008 Flat Flexible Cable from CN101 of
MV-52/53/54 board immediately ground FMO-008 Flat
Flexible Cable pattern using short clip. Metal paper clip can be
used as short clip.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P
1 Four Insulator Screws
2-3
Note:
Solder shortland before remove the
FMO-008 Flat Flexible Cable from
24 pin BU connector.
6 Two Insulator
5 FMO-008 Flat Flexible Cable (CN101, 24P)
4 MD-111 Harness (CN201, 6P)
2 FFC Holder
Advertisement
Table of Contents
