Table of Contents
Advertisement
a 1 collar for exhaust ducting 150
mm.
b 1 reducing collar for exhaust
ducting 125 mm.
c 1 non-return flap for fitting into the
exhaust socket on the motor unit
(not needed for recirculation mode)
d 1 cover to close off the upper
exhaust socket when ducting to the
rear or the side (...EXT models only)
e 2 covers for installation in the
extraction area
f Conversion kit for recirculation
mode (the conversion kit is not
supplied. It must be ordered
separately as an optional accessory
- see "Technical data"). The kit
contains an exhaust grille and
flexible aluminium hose with hose
clips.
4 x M5 x 40 mm screws, 4 washers,
4 x M5 nuts for securing the cooker
hood to an interim shelf.
Installation
35
Hide quick links:
Advertisement
Table of Contents
