Advertisement
5. INSPECT DISC RUNOUT
(a) Inspect the rear axle hub bearing looseness and axle hub runout
2010 Toyota Prius
Text in Illustration
*1
Micrometer
Standard thickness:
9.0 mm (0.354 in.)
Minimum thickness:
7.5 mm (0.295 in.)
If the disc thickness is less than the minimum, replace the
rear disc.
(b) While holding the disc using SST, tighten the disc with
the 5 hub nuts.
SST: 09330-00021
Torque: 103 N·m (1050 kgf·cm, 76ft·lbf)
(c) Using a dial indicator with magnetic base, measure the
disc runout 10 mm (0.394 in.) away from the outer edge of
the rear disc.
Text in Illustration
*1
Dial Indicator
Maximum disc runout:
0.15 mm (0.00591 in.)
NOTICE:
.
Repair Manual
Advertisement
