Service Call Errors - Canon Pixma MP560 Service Manual

2-2. Service Call Errors (by Cyclic Blinking of Alarm and Power LEDs)
Service call errors are indicated by the number of cycles the Alarm and Power LEDs blink.
Cycles of
blinking of
Alarm and
Power LEDs
2 times Carriage error [5100]
3 times Line feed error [6000]
4 times Purge cam
sensor error
5 times ASF (cam)
sensor error
Error
Error
code
An error occurred in the
carriage encoder signal.
An error occurred in the
LF encoder signal.
[5C00] An error occurred in the
purge unit.
[5700] An error occurred in the
ASF cam sensor (during
paper feeding from the
rear tray).
Conditions
(1) Smearing or scratches on the
(2) Foreign material or paper
(3) Ink tank conditions;
(4) Cable connection
(5) Part replacement:
(1) Smearing or scratches on the
(2) Foreign material or paper
(3) Cable connection
(4) Part replacement:
(1) Foreign material or paper
(2) Cable connection
(3) Part replacement:
(1) Cable connection
(2) Part replacement:
11 / 64
Solution
(Check points and
replacement items)
carriage slit film;
clean the timing slit film.
debris that obstructs the
carriage movement;
remove foreign material.
re-set the ink tanks.
- Timing slit disk film
- Carriage unit
- Logic board
- Carriage motor
LF / EJ slit film;
clean the LF / EJ slit film.
debris in the LF drive;
remove foreign material.
- LF / EJ slit film
- LF / EJ timing sensor unit
- Paper feed roller unit
- Logic board
- Paper feed motor
debris around the purge drive
system unit;
remove foreign material.
- Purge drive system unit
- Logic board
- ASF unit
- PE sensor board unit
- Logic board