JVC DLA-X90R Instruction Manual page 73

Adjustments and settings in the menu (continued)
[5-1] Network
command communication.
key to return to the previous screen.
Items Explanation, operation, precautions, settings
DHCP Client Sets the DHCP client.
Settings: On, Off
On
(*) The automatic retrieval starts with the "Set" within the menu.
Off The network settings are being done manually.
IP Address Sets the IP address.
Subnet Mask Sets the subnet mask.
Default Gateway Sets the default gateway.
MAC Address Displays the MAC address of the unit.
Set
[6] Information
lamp time and software version.
Use the UP and DOWN keys to select items. Press the
Displays upon HDMI/COMP. input
Items Explanation, operation, precautions, settings
Displays video image input terminal.
Input
Displays the name of the input source.
Source
Displays the color bit depth concerning an input video image signal.
Deep Color
(*) When you input YCbCr (4:2:2), it is not displayed.
(*) When there is information about DeepColor from the source device, it is displayed.
Displays the lamp use time.
Lamp Time
Soft er.
Displays upon PC input
Items Explanation, operation, precautions, settings
Input Displays video image input terminal.
Resolution Displays image resolution.
Displays the H Frequency.
H Frequency
Frequency
Deep Color Displays the color bit depth concerning an input video image signal.
(*) When you input YCbCr (4:2:2), it is not displayed.
(*) When there is information about DeepColor from the source device, it is displayed.
Lamp Time Displays the lamp use time.
Soft er.
Input
Source
Deep Color
Lamp Time
Soft Ver.
http://www.pureglare.com.au
ENGLISH
Network
DHCP Client On
IP Address
Subnet Mask
Default Gateway
MAC Address
Set
[192.168.0.2]
[255.255.255.0]
[192.168.0.254]
Input
PC
HDMI-2
Resolution 1920X1080
1080p60
H Frequency
67.50kHz
8bit
V Frequency
60.0Hz
160H Deep Color
Lamp Time
12.011 160H
Soft Ver.
12.011
[Off]
73