JVC DLA-X90R Instruction Manual page 69

Adjustments and settings in the menu (continued)
See Pixel Adjust Flow and Operation: Adjust(Fine)
TEMP] button on the remote control to display the [Adjust(Fine) Window]. Also, from the main menu, set the
[Adjust Area] to [All] and select [Adjust Color] and [Adjust Pattern], then move the cursor to [Adjust (Fine)]
(*) The range of adjustment may narrow depending on the adjust amount of the entire screen.
Adjust(Fine) window
You can use the [UP], [DOWN],
[LEFT], and [RIGHT] buttons to
change position.
Press the [OK] button on the remote control to enter the adjust operation mode. Use the [UP], [DOWN],
[LEFT], and [RIGHT] buttons to move and adjust pixels in the vertical and horizontal directions across the
entire screen. The adjustment settings appear in the center of the Adjust (Fine) window. Use the [BACK]
button to exit the adjust operation mode.
Pixel adjust setting
Remote Control
Operation Guide
(Reference page: 68)
This shows the maximum and minimum
overall screen error.(Max)/(Min)
When both H (horizontal direction) and V (vertical direction) show a maximum overall screen error of 31,
displayed setting. Furthermore, when the minimum overall screen error is -31, even if the adjust setting is
Pixel Adjust
Whole Adjust (Fine) Red
－1 （－20/－20）
H
1 （ 5 / 5 ）
V
Select
ADJUST. Color P. A. Area
Color A. BACK
PIC.
COLOR. COLOR.
GAMMA BACK
TEMP P.FILE. ADJ. Operate
H (Horizontal)
Adjust(Fine) window
Pixel Adjust Pixel Adjust
Whole Adjust (Fine) Adjust(Fine)
－1 （－20/－20） －1 （－20/－20）
H H
1 （ 5 / 5 ） 1 （ 5 / 5 ）
V V
Color P. Color P.
ADJUST. ADJUST. A. Area A. Area
Color A. Color A.
COLOR. COLOR. COLOR. COLOR. PIC. PIC.
GAMMA GAMMA
TEMP TEMP P.FILE. P.FILE. ADJ. ADJ.
Adjust setting
http://www.pureglare.com.au
ENGLISH
Adjust Pattern
Adjust Color
Red Red
Select Select
BACK BACK
BACK BACK
Operate Operate
69