Selecting Audio Languages (Dvd Only) - Marantz DV4300 User Manual

2. SLOW REVERSE (DVD ONLY)
1. Press PAUSE/STEP button during play mode
By pressing PAUSE/STEP button, the play mode is temporarily paused.
2. Press FR/SR button
If FR/SR button is pressed under PAUSE/STEP,
3. Press FR/SR button again
If FR/SR button is pressed again,
If pressed again
button. The CLEAR button clears slow state at any speed of slow.
S L OW
SLOW 1/2

Selecting Audio Languages (DVD only)

It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings. This
operation works only with discs on which multiple audio soundtrack languages are recorded. If the loaded disc supports multiple
languages, you can see AUD indicator on FL display.
1. Press AUDIO button during play
If a disc does have multiple languages, the audio information is displayed as the figure shown below and the audio language is
changed. If the loaded disc does not support multiple audio, the forbidden mark (
A U D I O
2. Choosing desired audio language
Pressing the AUDIO button continuously until the desired audio language is displayed.
This function is a disc dependent. There are some DVD discs that prevent selecting languages even though the disc supports
multiple languages. If this is the case, languages should be selected via the disc menu.
22
SLOW 1/4 is displayed and the speed changes even slower.
SLOW 1/8 is displayed and it changes slower in conformity to the ratio. To return to normal play, Press PLAY
1 2
3 8 : Dolby Digit 2 C H
Audio Change
SLOW 1/2 is displayed and the speed of the reverse direction becomes slower.
S L OW 1 4
SLOW 1/4
S L OW 1 8
SLOW 1/8
) is displayed.