Secondary Ide Controller - American Megatrends Atlas PCI-II User Manual

Peripheral Setup,
IDE Controller SettingsThe following characteristics can be
Peripheral Setup
Option
IDE LBA Mode
60 Atlas PCI-II Motherboard User's Guide
Continued
selected for the Onboard Primary, Onboard
Secondary, Offboard Primary, and Offboard
Secondary IDE controllers:
Use this option to enable IDE LBA (Logical
Block Addressing) mode. Older hard disk drives
use the CHS (Cylinder-Head-Sector) addressing
scheme that limits hard disk drives to 528 MB.
LBA permits drives capacities up to 5 GB.
Setting Description
Disabled
(Default).
Master Enable IDE LBA mode for the master
IDE
drive attached to the primary IDE
controller.
Slave Enable IDE LBA mode for the slave
IDE
drive attached to the primary IDE
controller.
Both
both the
Primary and Secondary IDE controller
are
enabled.
Description
Do not enable IDE LBA mode
Enable IDE LBA mode for