Marantz SR7010 Owner's Manual page 213

Contents Connections
o MultEQ ® XT32
MultEQ ® XT32 compensates for both time and frequency
characteristics of the listening area based on Audyssey
measurement results. Selection is done from three types of
compensation curves. We recommend the "Reference" setting.
Reference
(Default):
L/R Bypass:
Flat:
Off :
0 When using headphones, "MultEQ
Front panel Display
Playback
® Setup
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ ® XT32 on the front left
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Do not use "MultEQ XT32".
®
® XT32" is automatically set to "Off".
Rear panel
Settings
o Dynamic EQ
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics.
Works with MultEQ ® XT32.
On
(Default):
Off:
0 When the menu "Dynamic EQ" setting is "On", it is not possible to do "Tone"
adjustment. (v p. 158)
0 This can be set by pressing DYNAMIC EQ on the main unit.
213
Remote
Tips Appendix
Use Dynamic EQ.
Do not use Dynamic EQ.
Index