Eneo PNR-5104 Operating Instructions Manual page 69

− Name: Enter the Preset name.
− Condition Type: Select Event Condition.
− Select Target to produce event and event type: Select event types that trigger video recording.
−
Event from any device: Select to record video when
user-defined types of events are detected.
Click Event from any device, and the list of event
types is displayed in Event Types below → Select
the desired event types, and the selected event types
are added to the list under Event from any device
on the right.
−
All Devices: Select to record video when user-
defined types of events are detected from the selected
device or camera.
Click All Devices, and the list of registered devices
and cameras is displayed → Under All Devices, click
a device or camera to trigger event recording, and
the list of event types supported by the device or
camera is displayed in Event Types below → Select
the desired event types, and the selected event types
are added along with the selected device or camera
to the list under All Devices on the right.
−
Device Group: Select to record video when the user-
defined types of events are detected in the selected
device group.
Click Device Group, and the list of registered device
groups is displayed → Under Device Group, click
a device group to trigger event recording, and the
list of event types is displayed in Event Types below
→ Select the desired event types, and the selected
event types are added along with the selected device
group to the list under Device Group on the right.
Network Video Recorder
61