Setting Preset Stations; Band Menu - Cadillac Escalade Manual

Setting Preset Stations

Up to 30 stations, six AM, six FM1, six FM2, six XM1,
and six XM2, if equipped, can be programmed using the
six screen buttons on the bottom of each band menu.
To set preset stations, do the following:
1. Turn the audio system on.
2. Press the BAND hard key to select AM, FM1, FM2,
XM1, or XM2, if equipped.
3. Locate the desired station using the SEEK hard key
or the tuning knob.
4. Press and hold one of the six preset screen buttons
until you hear a beep. Whenever you press that
screen button while in that band menu, the station
you set will return.
5. Repeat the steps for each preset and source.

Band Menu

If the radio is on while the navigation system is not in use,
this band menu will display the current audio information,
as well as list the presets for the current band.
FM1 Source shown, Other Sources similar
3-3