Advertisement
T1.
How do I restore my Router's configuration to its factory default settings?
With the AP powered on, press and
hold the RESET button on the rear
panel for 8 to 10 seconds before
releasing it.
Hold it in for 8 to
10 seconds
Once the AP is reset, the current configuration settings will be lost and you
Note
will need to reconfigure the router.
T2. What can I do if I forget my password?
1)
Restore the AP's configuration to its factory default settings. If you don't know
how to do that, please refer to previous section T1;
2) Use the default user name and password: admin, admin;
3) Try to reconfigure your AP by following the instructions of this QIG.
T3. How can I do if I want to configure the High Power?
1)
Click "Wireless > Basic Settings" to enter Wireless Settings page.
2)
If you want to use the high power mode, check the box before "Enable High
Power Mode" and options available of the Power list will be 26dBm Max,
23dBm, 20dBm, 17dBm, 14dBm Min.
3)
If you don't want to use the high power mode, deselect the box before "Enable
High Power Mode" and options available of the Power list will be Max, 1/2, 1/4,
1/8, Min.
4)
Click Save to save the changes.
T4. What can I do if I cannot access the web-based configuration page?
1) Configure your computer's IP Address.
8
Hide quick links:
Advertisement
