Manual Recording; Switching Video Output - Kguard SHA28 User Manual

3.7 Manual Recording

With this function, you can manually record the video. The system will continuously record the video until you
manually stop the recording.
To enable manual recording:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Manual Record.
The video recording starts.
To stop the manual recording:
1
Right-click on the mouse to display the Pop-up menu.
2
Select Stop Manual Record.
The video recording stops.
Note:
This function is available only if record mode is set to schedule. See

3.8 Switching Video Output

With this function, you can switch the GUI output between the
two monitors (VGA or BNC). By default, the video output connection
is set to VGA.
To switch to BNC output:
1
In the preview mode, right-click on the mouse to display the Pop-up menu.
2
Select GUI on BNC.
Chapter 3: Getting Started
"4.1.2 Recording Setup" on page 31.
DVR User's Manual
29