Manual Recording; Recording Search & Playback; Search - Kguard KG-SHA104 User Manual

KGUARD Standalone DVR KG-SHA104/108 User Manual
You are able to config 24 hours recording schedule for every channel or all channel from Sunday to
Saturday.
Steps:
1. Select Channel
2. Select a recording status among ALARM, GENERAL and NO RECORD
3. Move the cursor to the time point you want to set, click on the box in the schedule time line that
you want to apply the selected record type to.
4. If you want to change another recording status, repeat step 2 & step 3.
5. You can use copy function to fast complete your settings.
6. Press APPLY button to save your settings.
On the main interface, you will be able to check the recording status:
R: normal recording
M: motion detection recording

5.2.2.3. Manual Recording

5.2.3. Recording Search & Playback
You can enter search & playback interface by pop-up menu bar or main menu.

5.2.3.1. Search

There are 2 short cut menus listed in the Pop-up menu: START
RECORD and STOP RECORD. They are Manual record &
manual stop record buttons and the START RECORD function
only work when current recording mode is as following
recording status:
1. NO RECORD
2. ALARM, but the motion is no happening now.
The STOP RECORD function can only stop manual recording.
Play back by exact date & time:
Modify the date & time, press PLAYBACK button to
play back video which is started from your appointed
date & time.
14
www.kguardsecurity.com