iHome iBT3 Instruction Manual page 10

Pairing Your Device
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT3. Once your device is
paired, the iBT3 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
2. Press the
enter auto-pairing mode and attempt to connect to a Bluetooth device. Otherwise, follow
step 3 to begin pairing.
3. Press and hold the
The unit will beep twice and the status indicator LED will flash blue, indicating the unit is in
pairing mode.
4. "iHome iBT3" should appear in your device's Bluetooth menu. If "Not Paired", "Not Connected" or similar
message appears, select "iHome iBT3" to connect it. If prompted for a passcode, enter "1234" on your
device's keypad.
iHome iBT3
For iPhone
5. If pairing is successful, a tone will sound and the Bluetooth indicator light will glow solid, indicating the
iBT3 is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the iBT3 will default to previous mode. Once the iBT3 is paired to a device, it
will attempt to autolink when the device is within range (about 30 feet).
Power Button to turn on the iBT3. The first time the unit is powered on, it will
Talk/Pairing/Play/Pause Button on the right of the unit for 2 seconds.
iHome iBT3
iHome iBT3
For other
7
iBT3
Using the
iHome iBT3