Related Manuals for iHome IP28
Summary of Contents for iHome IP28
- Page 1 Model iP28 The Portable Speaker System For Your iPhone & iPod Questions? Visit www.ihomeaudio.com...
-
Page 2: Table Of Contents
Controls and Indicators / iP28 Display ... 3 Setting Up the iP28... 4 Connect iP28 to Power Source, Installing/Replacing Backup Battery, Installing /Replacing Batteries for Portable Use Setting the Clock, Using the Alarm Listening and Charging iPod/iPhone, Using Sleep Mode & Dimme Using the Line-in Jack, Using the Travel Lock A Consumer Guide to Product Safety... -
Page 3: Quick Start
TEST T /off DC 7.5V line in lock Attach AC adaptor cable to jack on back of the iP28 and plug the other end into a wall socket to play and charge iPhone/iPod. Use this insert For this iPhone/iPod 4: iPhone/iPod Insert an iPhone or iPod into the dock (iPhone/IPod must not be in a “skin”... -
Page 4: Controls And Indicators / Ip28 Display
Snooze/Dimmer Button DST Switch Back of Unit /off line in lock DC Jack Line in Jack Travel Lock/Off Button iP28 Display Time/Alarm Display PM Indicator Travel Lock Indicator Universal Dock EXB Button Clock Set Button Alarm On-Off /Set Button clock... -
Page 5: Setting Up The Ip28
Follow applicable laws and regulations for transport and disposal. Installing/Replacing Batteries for Portable Use The iP28 uses 4 “AA” (LR6) batteries for portable playing (not included). If sound becomes weak or distorted while operating on batteries, it’s time to replace the batteries. -
Page 6: Setting The Clock, Using The Alarm
1 hour alarm cycle. Sure Alarm The iP28 has a sure alarm feature: if the backup battery is installed, the buzzer alarm will still sound in the event of power failure. Setting the Clock... -
Page 7: Listening And Charging Ipod/Iphone, Using Sleep Mode & Dimme
After selecting and placing the proper insert for your iPhone or iPod model, gently dock iPhone/iPod in Dock. When docked, the iPhone or iPod will charge until fully charged while the iP28 is connected to an outlet with AC adaptor. Unit will not charge iPhone or iPod when operating on batteries. -
Page 8: Using The Line-In Jack, Using The Travel Lock
Use an audio patch cord (not included, available at www.ihomeaudio.com) to play nondocking iPod models or other audio devices through the iP28 Line-in Jack located on the back of the unit (one end in the device’s line out or headphones jack, the other in the iP28 line in jack). -
Page 9: A Consumer Guide To Product Safety
A Consumer Guide to Product Safety When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. -
Page 10: Troubleshooting
You may need to reset your iPhone/iPod. Please refer to your manual for details. generation iPod, iPod iP28 cannot control those iPod models or other devices. Move Press the Menu button on your iPod Charge your iPhone/iPod for about 5 minutes... - Page 11 Sound source is distorted Batteries are weak Troubleshooting Make sure the iP28 is plugged into a working AC outlet to charge your iPhone or iPod Remove your iPhone or iPod from the dock and check for obstruction on the connectors in the dock and on your iPhone or iPod.
-
Page 12: Warranty Information
One Year Limited Warranty Information iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one year from the date of original purchase.