Planet HDVR-430 User Manual page 29

PTZ turned to the corresponding preset point.
Value Input Field
2. Cruise between Points
Multiple preset points connects to cruise lines, call cruise between points and the PTZ runs
around on the line
1) Cruise Between Points Settings
Cruise lines are connected by multiple preset points; setting procedure is shown below.
Step1: Refer to Picture 4.8; the Direction key will turn PTZ to designate a location. Click the
Settings button to enter PTZ to configure interface as Picture 4.11 shows.
Step 2: Click the Cruise button to input proper value in the Cruise Line and Preset Points fields.
Next, click the Add Preset Points button to complete setting (also can add and delete
cruise line which has been set up).
Step 3: Repeat Steps 1 and 2 to set out all the preset designated cruise lines.
Remove Preset: Please input preset value in the field; click the Remove Preset button to
remove the preset points.
Remove Cruise Line: Input the number of cruise line, click the Remove Cruise Lines button to
remove the cruise lines set.
Cruise Button
2) The Calls of Cruise between Points
Refer to Picture 4.8; click the Page Shift button to enter PTZ control menu as shown in Picture
4.10. Please input the number of cruise in the value field and then click Cruise between the
Points button. Next, PTZ begins to work on the cruise line. You can click the Stop button to
stop cruise.
Picture 4.10 PTZ Control
Picture 4.11 Cruise between Point Settings
Hybrid Digital Video Recorder
29
HDVR series
Preset Points
Time Interval
Cruise Line Field