Dhcp Reservation - D-Link DIR-412 User Manual

Section 3 - Configuration
If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation.
The router will assign the IP address only to that computer or device.
Configure the parameters, as described below, to create a new DHCP Reservation.
Note: This IP address must be within the DHCP IP Address Range.
DHCP Displays a list of the DHCP reservations that have been configured
Reservations List: on the router.
Number of In this section, you can see information about the LAN devices
Dynamic DHCP that are currently being leased IP addresses.
Clients:
Computer Name: Enter the computer name or select a computer name from the
drop-down menu on the right-hand side and click <<.
IP Address: Enter the IP address you want to assign to the computer or device.
This IP Address must be within the DHCP IP Address Range.
Enter the MAC address of the computer or device.
MAC Address:
When you have finished configuring the above settings, check the boxes next to the DHCP Reservation entries you
want to add to the DHCP Reservations List and click the Save Settings button at the top or bottom of the window to
save your entries and activate your reservations.
D-Link DIR-412 User Manual

DHCP Reservation

43