Service Tools; Standard Tools; Special Tools; Error Code Table - Canon 3370 Series Service Manual

Chapter 5

5.2 SERVICE TOOLS

5.2.1 Standard Tools

LBP3370 / LBP3310
The table below lists the standard tools required for servicing the printer.
No. Tool name
1 Tool case
2 Jumper wire
3 Clearance gauge
4 Compression spring scale
5 Phillips screwdriver
6 Phillips screwdriver
7 Phillips screwdriver
8 Phillips screwdriver
9 Flat-blade screwdriver
10 Precision flat-blade screwdriver set
11 Allen wrench set
12 File, fine
13 Allen (hex) screwdriver
14 Diagonal cutting pliers
15 Needle-nose pliers
16 Pliers
17 Retaining ring pliers
18 Crimper
19 Tweezers
20 Ruler
21 Mallet, plastic head
22 Brush
23 Penlight
24 Plastic bottle
25 Lint-free paper
26 Oiler
27 Plastic jar
28 Digital multi-measure

5.2.2 Special Tools

LBP3370 / LBP3310
No special tools are required for servicing this printer other than the standard tools.

5.3 ERROR CODE TABLE

5.3.1 Error Code

LBP3310

Error code

E000
E001
E003
E004
E014
E100
E197
5-2
Major cause/detection
The Fixing heater has a fault.
Fixing error high temperature
Fixing low temperature
Fixing assembly drive assembly circuit error
The Feed motor has a fault.
The scanner assembly has a fault.
The is an engine communication error.
T-5-1
Tool No. Remark
TKN-0001
TKN-0069 With a clip
CK-0057 0.02 to 0.3 mm
CK-0058 0 to 600 g for checking the cassette spring pressure
CK-0101 M4, M5 Length : 363 mm
CK-0104 M3, M4 Length: 155 mm
CK-0105 M4, M5 Length: 191 mm
CK-0106 M4, M5 Length: 85 mm
CK-0111
CK-0114 6-piece set
CK-0151 5-piece set
CK-0161
CK-0170 M4 Length: 107 mm
CK-0201
CK-0202
CK-0203
CK-0205 Applied to the axis ring
CK-0218
CK-0302
CK-0303 Employed to measure 150 mm
CK-0314
CK-0315
CK-0327
CK-0327 100cc
CK-0336 500SH/PKG
CK-0349 30cc
CK-0351 30cc
FY9-2032
T-5-2
Remedy
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the engine controller PCB.
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the engine controller PCB.
- Check the connector of the fixing film unit.
- Replace the fixing film unit.
- Replace the engine controller PCB.
- Replace the engine controller PCB.
- Check the connector of the main motor.
- Replace the main motor assembly.
- Replace the engine controller PCB.
- Check the connector of the laser scanner assembly.
- Replace the laser scanner assembly.
- Replace the engine controller PCB.
- Replace the video controller PCB.
- Replace the engine controller PCB.
0018-3182
0018-3183
0018-3193