Table of Contents
Advertisement
4 There is a plastic grill covering the filter. Pull on the handle in the center
of the grill to access the filter.
To replace the top cover, reverse steps one through three, taking care to align
the cover before snapping it into place.
Accessing the right filters
Before you can access the right filters, you must remove the left side door
and top left cover. See steps 1 through 3 above for more information.
To access the right filters:
1 With the projection arm down and locked, turn the projector on its side,
with the handle facing up.
2 Locate the screws on the bottom side of the right panel. Loosen the three
screws.
Figure 5-8, The three bottom screws
3 Turn the projector back to its base and raise the projection arm.
Maintenance
5-7
Advertisement
Table of Contents
