Table of Contents
Advertisement
Cyclops F/X
Your projector comes with Cyclops F/X—software effects that you can use to
make your presentations more interesting and effective. For more
information on Cyclops F/X, see Chapter 4, Cyclops F/X.
ADVANCED FEATURES
There are several advanced features of the DP9100 that make giving
presentations even easier. For example, you can program two keys on the
remote control, assigning them specific options. You can also save setting
profiles, allowing two presenters who use the same projector to save their
custom settings.
Programming the Cyclops remote control
You can program two keys on the Cyclops remote control, the Prog 1 and
Prog 2 keys, to perform commonly used actions or to access a setting that
you frequently adjust.
To program the Prog 1 and 2 keys, open the projector menus and choose
Preferences. Choose the key you want to program (Prog 1 or Prog 2) and
assign the feature or setting you want to access.
Note: If you want to set assign one of the Cyclops F/X effects to one of the
programmable keys, you must select Host in the Preferences menu.
Saving a user profile
Different presenters have different styles. The DP9100 offers a way for two
presenters to save their settings and recall them each time they give a
presentation.
To save the current video settings as a profile, open the projector menus and
choose Advanced, User. Choose User A or User B, adjusting each setting
you want to save. When you exit the projector menus, your settings will be
saved as the profile.
Note: Sense line and front/rear settings are not saved as part of the profile.
Sense line settings are automatically set when you turn on the monitor that is
connected to the projector.
When you want to use your profile, open the projector menus and choose
User, Advanced, then select your profile (User A or User B). The settings take
effect immediately.
2-12
Chapter Two
Advertisement
Table of Contents
