Makita ARBOR 2711 Instruction Manual page 22

i) When the width of rip i s 150 mm (6")
and wider, carefully use your right
hand to feed the workpiece. Use your
left hand to hold the workpiece in
position against the rip fence.
ii) When the width of rip i s 65 mm -
150 mm (2-1/2" - 6") wide, use the
push stick to feed the workpiece.
iii) When the width of rip is narrower than
65 mm (2-1/2"), the push stick cannot
be used because the push stick will
strike the balde guard. Use the auxi-
liary fence and push block. Attach the
auxiliary fence to the rip fence with
two "C" clamps.
I
2 2