Maytag YMED8100DC0 Use & Care Manual page 8

CYCLE GUIDE - SENSORCYCLES
Settings and options shown in bold are default settings for that cycle.
if settings are changed, the new settings will be remembered, if there is a power failure, settings will return to the default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Use Sensor Cycles for better fabric care and energy savings
The dryer senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Use the NORMAL dryness [eve[ to provide optimal energ
Cycle:
Heavy High
Duty
tems t oary:
Heavyweight items
such as towels or
heavy work clothes
Work clothes, casual
wear, mixed cottons,
sheets, corduroys
Shirts, blouses,
permanent press,
synthetics,
lightweight items
Undergarments,
blouses, lingerie,
performance wear
Large loads
of heavyweight
items
Normal
Wrinkle Control
De[icates
Sanitize
Bedding
Drying
Temperature:
Medium
Low
Extra Low
High
Medium
savings.
Dryness
Leveh
More
Normal
Less
More
Normal
Less
More
Normal
Less
More
Normal
Less
40
78
Jackets, comforters,
pillows
33
28
Op i n", Cyc,e Detai,s:
Damp Dry Signal i_ Offers stepped drying starting
Wrinkle Prevent* i_ with High heat followed by Medium
Reduce Static* i heat for enhanced fabric care
Steam Boost* and energy savings.
Energy Saver
Damp Dry Signal !_
Wrinkle Prevent*
i
Reduce Static* i
Steam Boost*
Energy Saver
Damp Dry Signal
Wrinkle Prevent t
Reduce Static*
Energy Saver
Damp Dry Signal
Wrinkle Prevent*
Reduce Static*
Energy Saver
@
More 1:10 Wrinkle Prevent* !
or
70
More 55 Damp Dry Signal [!_
Normal Wrinkle Prevent* [
Less Steam Boost* i
Energy Saver
Uses Medium heat to dry large
loads of mixed fabrics and items.
Normal is the preferred energy
cycle.
Uses a stepped drying temperature
from Medium to Low for improved
moisture removal and enhanced
fabric care.
Uses Extra Low heat to gently
dry delicate items.
This is a long cycle with high heat,
which has been proven to reduce
household bacteria. This cycle is
not recommended for all fabrics.
Use for large loads of heavyweight
fabrics.
Use for drying large, bulky items;
do not overfill dryer drum. Partway
through the cycle, the signal will
sound for 2 minutes to indicate
when it is time to rearrange items
for optimal drying.
* On steam models, you may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
* On steam models only.
Load Size Recommendations
For best results, follow the wet load size recommendations noted
for each cycle.
_ mall load: Fill the dryer drum with 3-4 items, not more than
1/4 full.
_ Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not tightly pack. Items need to tumble freely.
8