Installation Tips; Removing And Installing The Front Panel; Removing And Installing The Front Grille - Daikin FTXZ25NV1B Installation Manual

Installation Tips

 Removing and installing the front panel
• Removal method
1) Hook your fi ngers on both sides of the front panel and open until the panel stops.
Pushing further up from the stopping position allows the panel to be removed more easily.
2) While pushing the left side front panel shaft outward, push up the front panel and remove it. (Remove the right side front panel
shaft in the same manner.)
3) After removing both front panel shafts, pull the front panel toward yourself and remove it.
Front panel
shaft
• Installation method
Insert the right and left front panel shafts on the front panel
into the shaft holes one at a time and slowly close the
panel.
(Press on both sides of the front panel.)
 Removing and installing the front grille
• Removal method
1) Remove the front panel.
2) Direct the fl ap and the auxiliary fl ap downward.
3) Remove the streamer unit. (See Fig. 1)
4) Remove the screws that secure the front grille (right). (3 screws) (See Fig. 2)
5) While lifting up the front grille (top) with the fl athead screwdriver, unhook the tabs and remove the front grille (right).
(See Fig. 3)
6) Remove the screws that secure the front grille (left). (2 screws) (See Fig. 4)
7) While lifting up the front grille (top) with the fl athead screwdriver, unhook the tabs and remove the front grille (left).
8) Insert the fl athead screwdriver and remove the screw cover. (See Fig. 5)
9) Remove the screw that secures the service lid and remove the service lid. (See Fig. 6)
10) While lifting up the centre part of the front grille (bottom) toward yourself, unhook the 3 tabs. (See Fig. 7)
Fig. 4
Front grille
(left)
Fig. 7
17 17
Fig. 1
Front grille (bottom)
Front panel shaft
Shaft hole
Fig. 2
Streamer unit
Fig. 5
Flathead screwdriver
Screw cover
Front panel
shaft
Fig. 3
Top view
Front grille
(right)
Fig. 6
Service lid