Bissell 58F8 Series User Manual page 8

Empty Dirt Container
Empty when €lirt reaches the "Full"
line on the container.
1. Turn power OFF. Unplug power cord
from electrical outlet.
.
3.
.
Slide Lock 'n Seal lever to "Unlock" position.
Grasp dirt cup handle portionand pullstraight
out to removefrom vacuum and empty.
Place dirt container back in the vacuum
and slide lever to lock position.
NOTE: The dirt container may be
washed in warm water with mild
detergent. Make sure it is €om-
pleteF/dry before replacing.
Unlock Positior
e
Line
Position
ntenance and care
¢leanin_l the inner & outer circular filter
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
.
Remove dirt container. Grasp the filter
located at the bottom of the dirt con-
tainer, lift and pull straight out.
DO NOT PULL CIRCULAR FOAM
FILTER OUT OF THE FILTER CUP
WHILE IT IS STILL IN THE VACUUM.
e
3. Grasp the plastic tab on the top of the circu-
lar foam filters; twistto unlock and pull out.
e
8
www. b is s ell. co m y_>_, 800.237.7691