Bissell 58F8 Series User Manual page 7

Clean carpet sensor (select models only)
Clean carpet sensor detects dirt and
debris bemg picked up while vacuum is Clean Carpet Sensor
In use.
Red Light: Vacuumpicking up dirt
Alternate to Green andRed:
Slightly soiled area.
Green Light: Vacuumdetectsclean area.
Clean filter indicator (select models only)
The indicator tells you when lhe air
flow in your vacuum is reduced due to
dirty filters or a clog in the hose. The
indicator will remain green until lhe air
flow is reduced - and then will change
to red. When fully red, the airflow is
greatlyreduced or clogged by a dirty
filter; follow instructions on pages 8 & 9
to clean/replace your filters.
Tools
m
Attach desired tool to hose for above
floor cleaning surfaces or hard to reach
areas.
1. Remove Hose: with vacuum in upright
position, grasp the Quick Reach Handle
to separate hose from hose base.
2. Attach tools by firmly pushing onto
vacuum hose or extension wand.
A. Combination dusting brush/
upholstery tool:
Rotatefor desired use. Use brush side to
dust, or for blinds, books, lamps, shelves,
and baseboards. Useupholstery side to
for furniture, drapes, and fabrics.
B. Crevice Tool: Use in tight, narrow
spaces.
C. Extension Wand: Use with desired
attachment for longer reach.
D. TurboBrush Tool: Use rotation
brush action for small flat areas such
as stairs and cushions. Pressgently
down and pull towards you in raking
motion; too much pressure will cause
brush to stop rotating. Select models
TM
include Pet TurboEraser Tool- follow
same instructions for operation and
maintenance.
Clean Filter Indicator
NOTICE:
The floor brush will
continueto rotate
while you use your
vacuum for above
floor cleaning. To
prevent carpet dam-
age, do not lean on
the vacuum or let the
powerfoot tilt forward.
7
www.bissell.com _,_®_ 800.237.7691