GE PGS25KSEAFSS Owner's Manual And Installation Instructions page 15

Replacing the light bulbs. GEApplia.ces.com
Turning the contro/ to the 0 (off) position does not remove power to the light circuit.
Refrigerator Lights (onsomemodd.s)
CAUTION:L/g. b.,bs
be hot,
O Unplug the refrigerator.
To remove the light shield, grasp the shield
at the back and pull out to release the tabs
at the back.
Rotate the shield down and then forward to
release the tabs at the front of the shield.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield.
Plug the refrigerator back in.
NOTE'Appliance bulbs may be ordered from GE
Parts and Accessories, 800.626.2002.
LED Lighting - Module (on some models)
LED Lighting - Individual (on some models)
LED lighting will need to be replaced by an
authorized technician.
Call 1.800.432.2737 in the United States. In
Canada, call 1.800.561.3344
Light
Shield
Appearance may vary
Freezer Light (on some models)
A CAUTION:L g , b./bs
hot.
Unplug the refrigerator.
Remove the freezer basket for access. The
bulb is located at the rear of the freezer
inside a light shield.
To remove, grasp the shield at the top and
pull out to release the tabs at the bottom.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield and freezer basket.
Plug the refrigerator back in.
15