Craftsman 917.20386 Operator's Manual page 20

Hide thumbs Also See for 917.20386:
Table of Contents

Advertisement

Available languages

Available languages

DECK WASHOUT PORT
Your tractor's deck is equipped with a wash-
out port as part of its deck wash system. It
should be utilized after each use.
1.
Drive the tractor to a level, clear spot
on your lawn, near enough to a water
spigot for your garden hose to reach.
IMPORTANT:
Make certain the tractor's
discharge chute is directed AWAY from your
house, garage, parked cars, etc. Remove
bagger chute or mulch cover if attached.
2.
Make sure the attachment clutch control
is in the "DISENGAGED"
position, set
the parking brake, and stop the engine.
3.
Thread the nozzle adapter (packaged
with your tractor's Operator's Manual)
onto the end of your garden hose.
4.
Pull back the lock collar of the nozzle
adapter and push the adapter onto the
deck washout port at the left end of the
mower deck. Release the lock collar to
lock the adapter on the nozzle.
9.
Pull back the lock collar of the nozzle
adapter to disconnect the adapter from
the nozzle washout port.
10. Move the tractor to a dry area, prefer-
ably a concrete or paved area. Place
the attachment
clutch control in the
"ENGAGED" position to remove excess
water and to help dry before putting the
tractor away.
_,WARNING:
A broken or missing washout
fitting could expose you or others to thrown
objects from contact with the blade.
Replace broken or missing washout fitting
immediately, prior to using mower again.
Plug any holes in mower with bolts and
Iocknuts.
IMPORTANT:
Tug hose ensuring connec-
tion is secure.
5.
Turn the water on.
6.
While sitting in the operator's position
on the tractor, re-start the engine and
place the throttle lever in the Fast "'_!_"
position.
IMPORTANT:
Recheck the area to ensure
the area is clear. Ensure no children are in
the area while cleaning the deck.
7.
Move the tractor's
attachment
clutch
control to the "ENGAGED"
position.
Remain
in the operator's
position
with the cutting deck engaged until the
deck is cleaned.
8.
Move the tractor's
attachment
clutch
control to the "DISENGAGED"
posi-
tion. Turn the ignition key to the STOP
position to turn the tractor's engine off.
Turn the water off.
20

Advertisement

Table of Contents
loading

Table of Contents