Kenmore 795.51379012 Use & Care Manual page 10

Reinstalling the right (refrigerator) door
f
...... (5) I
V _-> _J_-_"_b'_ _ __
.Rivet
',
_ ', z-_ _ k_'...._) ,,
I Type 2 i
I ................... j
1. Place the door onto the lower hinge pin.
2. Fit top hinge (4) over hinge lever latch (5) into place. Rotate
lever (3) counterclockwise to secure hinge.
NOTE : Regardless of hinge lever type, reinstaJiation process is
the same.
3. Hook tab on switch side of corner under edge of wire
opening in cabinet top. Position cover (2) into place. Insert
and tighten cover screw (1).
(I)\
(6) .......
(7)
Type 1
Type 2
,(7)
I
1. Feed the water tubes through the lower hinge pin and place
the door onto the lower hinge pin.
2. Fit top hinge (6) over hinge lever latch (7) and into place.
Rotate lever (5) clockwise to secure hinge.
NOTE: Regardless of hinge lever type, reinstallation process is
the same.
3. Install the grounding screw (4) and connect aii the wire
harnesses (3).
4.Hook tab on door switch side of cover (2) under edge of
wire opening in cabinet top. Position cover into place. Insert
and tighten cover screw (1).
5.Reconnect the water tubes by inserting the tubes into the
connectors.
Coilet
Tube --
Insert Line
11