Table of Contents
Advertisement
Available languages
Available languages
32
HOWTO
USE
HOW TO USE
Operafing
fhe
dryer
Lint Filter
CLEAN THE LINT FILTER
If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last
load. This will help ensure the fastest and most efficient drying performance.
LOADTHE DRYER
Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to
divide it into smaller loads for proper performance and fabric care.
TURN ON THE DRYER
Pressthe Power button to turn on the dryer.The LCD Display will illuminate and a signal will
sound, if turned on. Referto page 10.
SELECT A CYCLE
Turn the cycle selector
knob either
direction
until the LED for the desired cycle is on.
The preset temperature,
dry level, and option
settings
for that cycle will be shown. Refer to page
32. Default settings for the selected
cycle can now be changed
if desired. This can be done using
the cycle modifier
buttons
as shown on page 34. Cycle options
can be added
using the option
buttons
as shown on page 34-35.
BEGIN CYCLE
Press the Start/Pause
button
to begin the cycle. The cycle can be paused at any time either by
opening
the door or by pressing
the Start/Pause
button.
If the cycle is not restarted
within
4
minutes, the dryer will shut offand
the cycle settings will be lost.
END OF CYCLE
When the cycle is finished,
the chime will sound if it is set. Remove your clothing
from the dryer
immediately
to reduce wrinkling.
If Wrinkle
Care is selected, the dryer will tumble
briefly every
few minutes
to help prevent
wrinkles
from setting
in the clothes.
Advertisement
Table of Contents
