Ice And Water - Maytag MFB2055YEW02 User Instructions

Table of Contents

Advertisement

Available languages

Available languages

The ice maker is not
The refrigerator is not connected to a
Connect refrigerator to water supply and turn water shutoff
producing
ice or is not
water supply or the water supply
valve fully open.
producing
enough ice
shutoff valve is not turned on
(on some models)
There is a kink in the water source line
A kink in the line can reduce water flow. Straighten the water
source line.
The ice maker is not turned on
Make sure the ice maker is on.
The refrigerator has just been installed
Wait 24 hours after ice maker installation for ice production
to begin. Wait 3 days for full ice production.
The refrigerator door is not closed
Close the door firmly. If it does not close completely, see
completely
"The doors will not close completely."
A large amount of ice was recently
Allow 24 hours for ice maker to produce more ice.
removed
An ice cube is jammed in the ice
Remove ice from the ejector arm with a plastic utensil.
maker ejector arm
NOTE: On some models, press the lever which opens the ice
maker door to access the ejector arm.
A reverse osmosis water filtration
This can decrease water pressure. See "Water Supply
system is connected to your cold
Requirements."
water supply
The ice cubes are hollow or
The water shutoff valve is not fully
Turn the water shutoff valve fully open.
small (on some models)
open
NOTE: This is an indication
There is a kink in the water source line
A kink in the line can reduce water flow. Straighten the water
of low water pressure,
source line.
A reverse osmosis water filtration
This can decrease water pressure. See "Water Supply
system is connected to your cold
Requirements."
water supply
Questions remain regarding water
Call a licensed, qualified plumber.
pressure
Off-taste,
odor or gray
Recently installed or replaced
Discard the ice and wash the ice storage bin. Allow 24 hours
color in the ice (on some
plumbing connections (New plumbing
for the ice maker to make new ice, and discard the first
models)
connections
can cause discolored
or
3 batches of ice produced.
off-flavored
ice and water.)
The ice has been stored too long
Discard ice. Wash ice storage bin. Allow 24 hours for ice
maker to make new ice.
Odor from stored food has transferred
Use airtight, moisture proof packaging to store food.
to the ice
There are minerals (such as sulfur) in
A water filter may need to be installed to remove the
the water
minerals.
Water is leaking from the
The water line connections were not
See "Connecting
the Water."
back of the refrigerator
fully tightened
Recently removed the doors and did
See "Remove and Replace Refrigerator Doors and Freezer
not fully tighten water line connection
Drawer Front."
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents