Hunter Type 5 Owner's Manual page 14

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Without the Light Fixture
7-13. To install without the light fixture, located
the lower switch housing which is attached
to the light kit. First, disconnect the plug
connectors between the two black wires.
7-14. Disconnect the plug connectors between
the two white wires.
7-15. Install the dummy terminals (included in
the sack parts) on the two disconnected wires in
the lower switch housing.
7-16. Next, remove the shroud by removing
the two fasteners that attach the shroud to the
switch housing.
7-17. Install the switch housing cap and plug
button to the lower switch housing.
7-18. Once you have removed the light fixture,
continue with step 7-5.
Female Dummy
Terminal
Male Dummy
Terminal
42467-01 • 11/26/12 • Hunter Fan Company
Step 7-16
Cap
Plug Button
Step 7-17
14