Hunter Type 5 Owner's Manual
Hide thumbs
Also See for Type 5:
- Owner's manual and installation manual (19 pages) ,
- Installation and operation manual (12 pages) ,
- Owner's manual and installation manual (16 pages)
Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 42467-01
20121126
©2012 Hunter Fan Co.
Type 5 Models
Type 5 Models
Type 5 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Related Manuals for Hunter Type 5
Summary of Contents for Hunter Type 5
- Page 1 Type 5 Models Type 5 Models Type 5 Models For Your Records and Warranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. Owner’s Guide and Installation Manual __________________________________________ Model Name __________________________________________ Model No.
-
Page 2: Table Of Contents
• To reduce the risk of fire, electrical shock, or motor damage, do not 7 • Completing Your Installation With or use a solid-state speed control with this fan. Use only Hunter speed Without a Bowl Light Fixture ..12 controls. - Page 3 If you want to use an existing fan site, complete the following checklist to determine Fan Support if the site is acceptable and safe for your new Hunter fan. If you cannot check off System every item, prepare a new fan site as described on this page.
- Page 4 ANSI/NFPA 70. If your ceiling fan, go to your fan manual and continue with Section 2 • Installing the you are unfamiliar with wiring, use a Ceiling Plate. qualified electrician. 42467-01 • 11/26/12 • Hunter Fan Company...
- Page 5 Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual Ceiling include instructions for both Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Do not over tighten. Flat Washer 3” Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the label adhered to the ceiling plate is closest to the ceiling peak. 42467-01 • 11/26/12 • Hunter Fan Company... -
Page 8: Assembling And Hanging The Fan
2” downrod, the adapter cover will not Hole be used. 3-5. Raise the fan and place the hook on the ceiling plate through the round hole in the rim. 42467-01 • 11/26/12 • Hunter Fan Company... -
Page 9: Qualified Electrician
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42467-01 • 11/26/12 • Hunter Fan Company... -
Page 10: Installing The Canopy
Canopy 5-3. Twist canopy counterclockwise to secure. Screw 5-4. Install third canopy screw in round hole on canopy. Securely tighten all three screws. Step 5-1 Canopy Step 5-3 Canopy Screw 42467-01 • 11/26/12 • Hunter Fan Company... -
Page 11: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. -
Page 12: Completing Your Installation With Or Without A Bowl Light Fixture
Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Steps 7-5 – 7-6 Lower Housing Switch Assembly Housing Screw 42467-01 • 11/26/12 • Hunter Fan Company... - Page 13 7-12. Attach the pull chain pendants to the light and fan pull chains using the breakaway connector. (You may find the breakaway connector on the end of the pull chain.) Acorn Shroud Post Steps 7-8 – 7-10 Breakaway Chain Connector Hole Step 7-12 Step 7-11 42467-01 • 11/26/12 • Hunter Fan Company...
- Page 14 7-17. Install the switch housing cap and plug button to the lower switch housing. 7-18. Once you have removed the light fixture, continue with step 7-5. Step 7-16 Male Dummy Terminal Female Dummy Terminal Plug Button Step 7-17 42467-01 • 11/26/12 • Hunter Fan Company...
-
Page 15: Fan
8-3. The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. -
Page 16: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 (In Canada, call 866-268-1936) or visit us at our website at http://www.HunterFan.com. Hunter Fan Company 7130 Goodlett Farms Parkway #400 Memphis, Tennessee 38016 42467-01 • 11/26/12 • Hunter Fan Company...