Power Cord; Power Button - Bissell 22Q3 series User Manual

Power cord
The power cord is located at the rear
of the vacuum. Gently pull out the
power cord, watching for the yellow
line. Stop pulling the power cord once
the yellow line is visible. There is also
a red line, which indicates the end of
the usable cord. Do not pull the power
cord out beyond the red line.
Cord
Rewind Button
Power button
Turn the power ON or OFF by pressing
lightly downward on the power button
(®).
Automatic cord rewind
Your vacuum is equipped with an
automatic cord rewind. When cleaning
is finished, press the power button
OFF ( © )and grasp the plug to discon-
nect from the electrical outlet. Hold the
plug and press the automatic cord
rewind button to rewind the cord
automatically.
CAUTION: J
Be careful to avoid injury as
cord retracts very quickly.
Power Variable Suction
Button Control
Variable suction power control
The variable suctionpower control is
located on the top ot the vacuum. Turn
the control toward the larger dots for
maximum suction. Turn the control
toward the smaller dots to minimize
suction for lightly soiled areas or
delicate fabrics.
/ CAUTION:
Before usina your vacuum,
make sure t_clt the dust bclg
and all filters
(pre-mptor and
post-motor) are in place. Do
not operate your vacuum
without the dustbag and
filters.
6
www.bissell.com y_, 800.237.7691