Advertisement
Available languages
Available languages
FiNiSHiNG
iNSTALLATiON:
1. Install the 1" x lb"
x 84" long stuffer seal between the wall-sleeve
and the unit. A flat-bladed screwdriver or putty knife is recommended.
2. Assemble the trim frame by inserting top and bottom pieces into side
pieces and snapping into place.
3. Pull cord through trim frame then slide over unit until flush with wall.
NOTE: For larger sleeves, an accessory trim kit is available(EA120T).
Call 1-800-4-MY-HOME
to order and purchase kit.
Advertisement
