Makita Construction Coil Nailer AN621 Instruction Manual page 9

Stop nailing operations immediately if you
notice something wrong or out of the ordi-
nary with the tool.
Always disconnect the air hose and remove
all of the nails:
1.
When unattended.
2. Before performing any maintenance
or
3. Before cleaning a jam.
4. Before moving the tool to a new location.
repair.
Perform cleaning and maintenance right
after finishing the job. Keep the tool in
tip-top condition. Lubricate moving parts to
prevent rusting and minimize friction re-
lated wear. Wipe off all dust from the parts.
When not operating the tool, always lock
the trigger by turning the change lever to
the LOCK
position.
I
I
*
9