Makita Construction Coil Nailer AN621 Instruction Manual page 4

Only those involved in the work should be
in the vicinity. Children especially must be
kept away at all times.
There may be local regulations concerning
noise which must be complied with by
keeping noise levels within prescribed
limits. In certain cases, shutters should be
used to contain noise.
*Do not play with the contact element: it
prevents accidental discharge, so it must
be kept on and not removed. Securing the
trigger in the ON position is also very dan-
gerous. Never attempt to fasten the trigger.
Do not operate a tool if any portion of the
tool operating controls is inoperable, dis-
connected, altered, or not working prop-
erly.
Operate the tool within the specified air
pressure of 0.44
-
0.83
MPa
(65
-
120
PSIG) for safety and longer tool life. Do not
exceed the recommended max. operating
pressure of 0 . 8 3 MPa (120 PSIG). The tool
should not be connected to a source whose
pressure potentlally exceeds 1.37 MPa (200
PSIG).
Shutter
I
-~
Contact element
0.83
MPa
0.83
MPa
(120 PSIG) (120 PSIG)
4