Makita Construction Coil Nailer AN621 Instruction Manual page 17

When not in use, lock the trigger and disconnet
the hose. Then cap the air fitting with the cap.
When the tool is not to be used for an extended period of time, lubricate the tool using pneumatic
tool
oil and store the tool in a safe place. Avoid exposure to direct sunlight and/or a humid or hot
environment.
Iron dust that adhere to the magnet can be blown
off
by
using an air duster.
Maintenance of compressor, air set and air hose
After operation, always drain the compressor tank and the air filter. If moisture is allowed to enter the
tool.
it
mav result in Door Derformance and Dossible tool failure.
-
Drain cock
1 - Air litter
17