Using A Dynamic Ip (Pppoe Connection); Configuring Audio Output - Zotac ZBOX User Manual

ZOTAC ZBOX

Using a dynamic IP (PPPoE connection)

1. Repeat Step 1-3 in the previous section.
2. Select "Obtain an IP address automatically" and click "OK".
3. Click "Create a new connection" to start the NEW Connection Wizard.
4. Click "Next".
5. Select "Connect to the Internet" and click "Next".
6. Select "Set up my
connection manually".
7. Select your connection
type and click "Next".
8. Enter your ISP Name and
click "Next".
9. Enter your User name and
Password. Click "Next".
10. Click "Finish" to finish the
configuration.
11. Enter your user name and password. Click
"Connect" to connect to the internet.
Note: Contact your internet Service Provider (ISP) if you have problems connecting to the network.

Configuring audio output

Follow the steps below to enable audio output when connecting the ZOTAC ZBOX to
a TV or receiver via HDMI.
1. Access the Sound settings via the system
Control Panel.
2. Under Playback devices, click the display
device that corresponds with your audio
compatible display.
3. Click the "Set Default" button in the lower
right hand corner.
4. Click "OK" to exit the setup.
16
291-MB240-00