Setting Up Your Zotac Zbox - Zotac ZBOX User Manual

Hide thumbs Also See for ZBOX:

Table of Contents

ZOTAC ZBOX

Setting up your ZOTAC ZBOX

You need to connect peripherals before using your ZOTAC ZBOX.

1. Connecting a WiFi antenna module

Connect a WiFi antenna module to the WiFi antenna connector.

Note: When using the ZOTAC ZBOX, please be sure that the WiFi antenna

module is connected to the WiFi antenna connector for the better performance

of the WiFi/Bluetooth.

2. Connecting to USB 3.0 devices

Connect USB 3.0 devices such as external hard drives, SSDs and flash drives to

the USB 3.0 port on the system rear panel.

3. Connecting to a network device

Connect one end of a network cable to the LAN port on the system rear panel and

the other End to a hub or switch.

4. Connecting to a DVI-I display

Connect one end of a DVI-I cable to an HDTV or monitor, and the other end to the

DVI-I port on the system rear panel.

5. Connecting to an HDMI display

Connect one end of an HDMI cable to the HDMI port on the system rear panel and

the other end to a HDMI-compatible display such as an HDTV or monitor.

6. Connecting an optical S/PDIF output

Connect a digital audio device via optical S/PDIF output.

7. Connecting the power adapter and turning on the ZBOX

Connect the supplied AC adapter to the DC IN jack on the system rear panel and

then press the power switch on the front panel to turn on the system.

When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the



AC outlet to save on power consumption.

Table of Contents