Functional Description - Makita IMPACT WRENCH 6904VH Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Switch trigger
1. Reversing switch
1. Speed change lever
6
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
002311
CAUTION:
• Before plugging in the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF"
position when released.
To start the tool, simply pull the switch trigger. Tool speed is
increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
Reversing switch action
002322
This tool has a reversing switch to change the direction of
rotation. Press the upper side (FWD side) of the reversing
1
switch for clockwise rotation or the lower side (REV side) of
the reversing switch for counterclockwise rotation.
CAUTION:
• Always check the direction of rotation before operation.
• Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
Speed change
002329
To change the speed, slide the speed change lever to the "H"
side (lower side) for high speed or to the "L" side (upper side)
for low speed. Be sure that the speed change lever is set to
1
the correct position before operation. Use the right speed for
your job.
CAUTION:
• Do not use the speed change lever while the tool is
running. The tool may be damaged.