Operation - Makita IMPACT WRENCH 6904VH Instruction Manual

ASSEMBLY
1
2
1. Socket
2. Anvil

OPERATION

N.m
(ft.lbs)
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Selecting correct socket
Always use the correct size socket for bolts and nuts. An
incorrect size socket will result in inaccurate and inconsistent
fastening torque and/or damage to the bolt or nut.
Installing or removing socket
002335
To install the socket, push it onto the anvil of the tool until it
locks into place.
To remove the socket, simply pull it off.
The proper fastening torque may differ depending upon the
kind or size of the bolt, the material of the workpiece to be
fastened, etc. The relation between fastening torque and fas-
tening time is shown in the figures.
Standard bolt
M16X50 (5/8" X 2") at high speed
140
(101)
120
(87)
100
(72)
80
(58)
60
(43)
M12X50 (1/2" X 2") at high speed
40
M12X50 (1/2" X 2") at low speed
(29)
20
M10X50 (3/8" X 2") at low speed
(14)
M10X50 (3/8" X 2") at high speed
0 1
M16X50 (5/8" X 2") at low speed
2 3
Fastening time
M16 (5/8")
M12 (1/2")
M10 (3/8")
(S)
7